Reduce material costs with Tapered Sumps, Hips, & Valleys

Hinged Target Sumps 

Pre-assembled with Tapered H-Shield or Tapered H-Shield CG 25 PSI. Sumps have perimeter edge thicknesses of 1.5”, 2”, 2.5” or 3” and can assist in saving 50% in material and waste costs over field fabricated sumps.

Target Sumps

Manufactured with Tapered H-Shield CG 25 PSI only. This sump comes pre-assembled with ½” slope in thicknesses of 0.5" to 2.0" and can assist in saving 74% in material and waste costs over field fabricated sumps.

Hips and Valleys 

Pre-assembled using two 4’x4’ panels of Tapered H-Shield or Tapered H-Shield CG, cut in half at 45 degrees. Pre-cut hips and valleys can assist in saving 50% in material and waste costs over field fabricated hips and valleys.

Start saving with Tapered Sumps, Hips, & Valleys!